3D Hobby Shop 106″ Edge 540 V2 – Orange Scheme

5,900

טיסן 35% למנועי 100-120 סמ”ק.

במלאי

קטגוריה: , מקט: 364O

תיאור

Specifications

Winspan: 106″
Length: 103″ (with spinner), 90″ without rudder installed
Wing Area: 2025 Sq. Inches
Weight 23-28 lbs.

Power System

Desert Aircraft DA 120cc
Blazing Star DA 120 stand-off
FlowMaster 34 oz. fuel tank
EF Fuel Dot
5″ spinner
Header Drop: 70mm for canister or tuned pipe applications

Radio

A modern radio with channel mixing

Servos

Qty. 7 MKS HBL-380, HBL-599 or HV 777 (both highly recommended)
Qty. 7 Hitec HS-7950, HSB-9380TH, D-950TW
One throttle servo such as the MKS HV-1250

Servo Arms

Qty. 4 Extreme Flight 1.5″ single servo arms (tapped 3mm) for Ailerons
Qty. 2 Extreme Flight 2″ single servo arms (tapped for 3mm) for Elevators
Qty. 1 Extreme Flight 4″ double servo arm (tapped for 3mm) for Rudder

Servo Extensions

Qty. 2 Extreme Flight 20 AWG 24 inch for outboard Ailerons servos
Qty. 2 Extreme Flight 2-wire MPX Servo Plugs for aileron hook upQty. 2 Extreme Flight 20 AWG 48 inch for ElevatorsQty. 1 Extreme Flight 20 AWG 24 inch for Throttle servo
Qty. 2 Extreme Flight 20 AWG 48 inch for Elevators
Qty. 1 Extreme Flight 20 AWG 24 inch for Throttle servo

The 106″ Edge V2 is an evolution of the tremendously popular 3DHobbyShop 100-120CC Edge 540. This proven aerodynamic package, loved by low-n-slow 3D pilots and freestyle fans, is now paired with the same intensive carbon composite technology as our groundbreaking Extreme Flight 120CC Slick 580 EXP.

The Edge V2 uses carbon-fiber reinforced construction in the fuselage, wings, and tail to stand up to the worst freestyle and XA abuse. This light, strong and stiff construction is unmatched in the world of wood aerobatic ARF aircraft. If you are looking for the highest technology 3D giant scale ARF, this is the plane.

The 106″ Edge, like its sister airplane the 120CC Demonstrator, uses 3D-perfected airfoils for total stability with no wing rock, and a super confidence-inspiring harrier both upright and inverted. The design features very powerful ailerons for a high roll rate at all speeds. It features low coupling for super-easy and stable knife-edge flight. So, if you want this proven, winning, ultra-high performance aerodynamic package, you can choose your poison: The Demonstrator with the printed covering scheme, or this Edge V2 with a classic Ultracote scheme.

The 106″ Edge V2 also features our proven Extreme Flight R/C Hardware system with composite horns, high-quality turnbuckles, high-grade ball links, high quality threaded hardware, and much more. The new Edge V2 now features our rock-solid proprietary carbon-aluminum tail-wheel system, so there’s no need to spend $$ on an aftermarket unit. A 2-piece cowl in included for easy engine access, as well as our pre-assembled scale cockpit system with pilot figure. This ARF really has it all: Proven, ultra-high flight performance that satisfies multiple XFC and Clover Creek champ Jase Dussia, the latest in construction technology, the latest in styling and detail…This is the Hucking, Freestyling king.

If you’ve never had a really good Edge 540, you’re missing out. The straight leading edge design of the classic Edge 540 wing planform is confidence-inspiring for flying low and slow. The 106″ Edge V2 combines that confidence with Extreme freestyle and XA ability, for a package that will make you want to burn gallons and gallon of gas. If you’ve never had a really good Edge, you need one, and this is a really, really good Edge.

  • Carbon composite structure
  • Carbon main landing gear
  • Carbon-aluminum tail wheel
  • Removable rudder
  • Carbon wing tube with carbon receivers
  • Dual carbon tail tubes
  • Pre-assembled scale cockpit
  • Wing and tail bags
  • Canopy cover
  • Aluminum-center wheels
  • High quality ball link and turnbuckle hardware
  • Two-piece cowl
  • Side-force generators

חוות דעת

אין עדיין חוות דעת.

היה הראשון לכתוב סקירה “3D Hobby Shop 106″ Edge 540 V2 – Orange Scheme”

האימייל לא יוצג באתר. שדות החובה מסומנים *

שלח תגובה